Run on the home end, the check that nothing new from the tunnel reaches
the instance's server failed at once with "missing port number" instead
of trying. OpenBSD's nc, as the WireGuard image has it, ends the try with
its own -w, without timeout or a shell around it; checked on the home end
on 31 Oct 2026, where it gave up after 5 s.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
A tunnel that fails to come up takes Jellyfin's internet with it, as
linuxserver/wireguard's client mode deletes the default route. Named by
learn.halkyon.eu, the endpoint needed DNS to come up, which the home end
starting or waking hasn't always got yet; by its address the tunnel comes
up whatever the network does. Closes ADR 0032's open point.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
linuxserver/wireguard's client mode deletes the default route when wg0.conf
fails to come up, so Jellyfin, in its namespace, loses TMDb and scans get
frames for posters. The README's step 4 says so and how to recover; ADR
0032 holds the ways out, open for the developer to decide.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
The instance serves jellyfin.halkyon.eu and its Caddy proxies through a
WireGuard tunnel to a Jellyfin on the operator's own machine, which dials
out, so nothing names the home network's address and its router opens no
port. compose.jellyfin-home.yaml takes the sidecar's place, with its
site's rules unchanged (jellyfin.caddy's upstream is now a setting), and
leaves JELLYFIN_URL unset, so the instance suggests it only while it
answers.
On the instance's server the tunnel reaches Jellyfin from Caddy alone and
nothing of the host (wg-jellyfin-rules.sh, set and removed with the
tunnel); the CI runner's unit denies it, and CI's Sandbox step fails if a
job reaches it. The home end keeps Jellyfin in WireGuard's network
namespace, its port on the loopback alone. The steps are in
deploy/sidecars/README.md, the rules held by test/deploy/jellyfin_home_test.dart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
A failed BRouter segment or listing, a failed tile cut or an unwritable folder waited the whole refresh period, 30 days without routes or a map; they try again after an hour, doubling to a day. Photon's failed download backs off from a day to a week, and a dead Photon is noticed within a minute. The downloads' network is an ordinary bridge the three share, as the comments now say.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
A `search` endpoint asks the instance's Photon (compose.search.yaml, Europe's
database from GraphHopper, renewed monthly) for people signed in, limited and
unlogged. The planner gets a field over its map: the places found nearest the
map's centre first, in the app's language; one chosen is the next waypoint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
Protomaps' basemap cut for Europe and served by pmtiles beside Train's server
(compose.maps.yaml), drawn by Train's own style, light and dark, which the
server serves. Only people signed in get tiles: map.source hands a key that
Caddy has the server check before each tile; nothing logs a tile.
Also fixes .dockerignore, which left apps/train/ out of the build context, so
Train's server's and BRouter's images couldn't have been built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
deploy/compose.train.yaml adds Train's server at train.halkyon.eu, a
member of Learn's register, with its database halkyon_train in the
instance's PostgreSQL, and BRouter beside it alone (v1.7.10, checked by
SHA-256, no log), its segments of the operator's region kept current
monthly. Nothing changes until deploy/.env names the compose file:
redeploy.sh and backup.sh take Train in only then, and the operator's
steps are in sidecars/README.md. restic now forgets snapshots grouped by
host alone, so adding Train's dump leaves no group behind for good.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
Step 1 of both sidecars changed into deploy's home before its sudo
commands, but Ubuntu closes a home to other users, so the operator's
own user, the one with sudo, gets "Permission denied" there (found
setting up LanguageTool on learn.halkyon.eu's server, 26 Oct). sudo
reaches the folders by their full paths, which the shell makes of
~deploy without entering it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
compose.languagetool.yaml runs LanguageTool's open-source server
(meyay/languagetool 6.8-13, pinned by digest) on `edge` with no site and
no published port, as user 61081 on a read-only filesystem, without a
log. The server alone reaches it (LANGUAGETOOL_URL): grammar.check is
for those signed in, takes 20,000 characters, 60 checks a minute each
(counted in memory), maps a studyset's language to LanguageTool's code
and keeps nothing. instance.info() names the languages it checks; the
privacy page says what goes there. sidecars/README.md has the steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
Caddy's network had IPv4 alone, so Docker's userland proxy forwarded
every IPv6 visitor to Caddy from the network's gateway, and the server
counted all of them as one network (the second reading's M5, reasoned).
The edge network gets a unique local /64 (fd4a:6c6b:7e80::/64), Caddy a
fixed address in it beside its IPv4 one, both trusted as the proxy; the
CI runner's unit denies fd00::/8 and its sandbox check tries Caddy's IPv6
address too. A commit of its own: it needs Docker 27 or later with
ip6tables on the server and the network made anew (compose down, never
-v, then up), checked by hand first (NEXT.md).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
With Jellyfin's default of three failed tries, anyone could switch the
demo off with three wrong passwords; an account without a password has
nothing for the lockout to guard. The runbook also says how people sign
in to it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
rsync has to be installed on both ends, and learn.halkyon.eu's server
has none; tar through SSH needs nothing the server lacks.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
The sidecar's steps made Jellyfin's user with its own group, to which
useradd gave a system group ID (987 on learn.halkyon.eu's server), while
compose.jellyfin.yaml runs it as 61096:61096. The group is now made
first with the same ID, and the steps say why useradd's warning about an
ID above the system range is meant.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
An instance may now run services beside itself, each a compose file of
its own switched on in deploy/.env (COMPOSE_FILE=compose.yaml:compose.
jellyfin.yaml), so the deploy runs them with the instance. The first is
Jellyfin, which people watch and listen to learn from: the instance then
suggests it (JELLYFIN_URL from JELLYFIN_DOMAIN), and Caddy serves its
site, refusing every change to a user from outside, so a passwordless
demo account stays everyone's; its admin signs in through an SSH tunnel.
The instance's compose gets a second network, `edge`, for Caddy (at a
fixed address, which sidecars trust as their proxy) and the server;
Postgres stays on the internal one. Caddy loses its needless way to
Postgres, and a sidecar never gains one. A sidecar publishes no port,
as the CI runner may reach 127.0.0.1, and runs as a user ID of its own.
Caddy imports the sidecars' sites from sidecars/, mounted by their
compose files (none without), and redeploy.sh recreates it when one
changes. sidecars/README.md has the steps.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signed-off-by: Tizian 「ティツィアーン」 <raisondetredev@pm.me>
